Minnesota Well Data field records · 2026 survey

Minnesota Well Data › Sherburne County

Sherburne County, Minnesota: well depth, water level & drilling cost

✓ 17,656 CWI records · verified 2026-06-29

90 ftmedian well depth
69 ft–130 fttypical depth range
22 ftmedian static water level
30 gpmmedian yield (17,130 tests)

How deep are wells in Sherburne County, Minnesota?

The median drilled well depth in Sherburne County is 90 ft, based on 17,639 wells with recorded depths in the state CWI database. Half of all wells fall between 69 ft and 130 ft; 90% are shallower than 185 ft. Wells drilled since 2016 have a median depth of 86 ft.

How much does it cost to drill a well in Sherburne County?

Applying published per-foot rates to the local median depth of 86 ft: drilling and casing alone typically runs $2,150–$5,590; a complete system including pump, pressure tank, and hookup typically runs $5,160–$8,600. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Sherburne County?

The median static water level is 22 ft below ground surface (middle half of wells: 15 ft–32 ft), from 14,866 measurements.

How much water do wells in Sherburne County produce?

The median tested yield is 30 gpm (middle half: 20 gpm–50 gpm), from 17,130 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Sherburne County address — $19

Drilled depth distribution

0–50 ft 751 50–100 ft 9,515 100–150 ft 4,069 150–200 ft 1,846 200–300 ft 1,120 300–400 ft 295 400–600 ft 40 600+ ft 3

Who drills wells in Sherburne County?

Drillers by number of wells completed in this county since 2016, per filed well records (Minnesota County Well Index).

DrillerWells since 2016
THOMPSON, S.185
FOBBE, R.183
MCALPINE, J.154
SEE REMARKS152
ALBERG, G.142
MCALPINE, T.132
PRAUGHT, S.104
MOTZKO, J.91

Get quotes from local drillers

Looking at a specific property in Sherburne County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Well records by ZIP code in Sherburne County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.