⟁ Minnesota Well Data field records · 2026 survey

Minnesota Well Data › Pine County › Paul (55101)

Paul, MN (55101): well depth, water level & drilling cost

✓ 74 CWI records · Pine County

105 ftmedian well depth
58 ft–140 fttypical depth range
23 ftmedian static water level
20 gpmmedian yield (59 tests)

How deep are wells in Paul (55101), Minnesota?

The median drilled well depth in Paul (55101) is 105 ft, based on 74 wells with recorded depths in the state CWI database. Half fall between 58 ft and 140 ft; 90% are shallower than 285 ft.

How much does it cost to drill a well in Paul (55101)?

Applying published per-foot rates to the local median depth of 121 ft: drilling and casing alone typically runs $3,025–$7,865; a complete system including pump, pressure tank, and hookup typically runs $7,260–$12,100. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Paul (55101)?

The median static water level is 23 ft below ground surface (middle half of wells: 10 ft–39 ft), from 52 measurements.

Pull every recorded well near a Paul (55101) address — $19

Drilled depth distribution

0–50 ft 10 50–100 ft 25 100–150 ft 22 150–200 ft 6 200–300 ft 3 300–400 ft 7 400–600 ft 1 600+ ft 0
Looking at a specific property in Paul (55101)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Part of Pine County well records.

Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.