⟁ Minnesota Well Data field records · 2026 survey

Minnesota Well Data › Ramsey County › Paul (55117)

Paul, MN (55117): well depth, water level & drilling cost

✓ 235 CWI records · Ramsey County

105 ftmedian well depth
76 ft–143 fttypical depth range
35 ftmedian static water level
20 gpmmedian yield (201 tests)

How deep are wells in Paul (55117), Minnesota?

The median drilled well depth in Paul (55117) is 105 ft, based on 231 wells with recorded depths in the state CWI database. Half fall between 76 ft and 143 ft; 90% are shallower than 206 ft.

How much does it cost to drill a well in Paul (55117)?

Applying published per-foot rates to the local median depth of 104 ft: drilling and casing alone typically runs $2,600–$6,760; a complete system including pump, pressure tank, and hookup typically runs $6,240–$10,400. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Paul (55117)?

The median static water level is 35 ft below ground surface (middle half of wells: 17 ft–60 ft), from 168 measurements.

Pull every recorded well near a Paul (55117) address — $19

Drilled depth distribution

0–50 ft 8 50–100 ft 93 100–150 ft 78 150–200 ft 24 200–300 ft 23 300–400 ft 4 400–600 ft 1 600+ ft 0
Looking at a specific property in Paul (55117)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Part of Ramsey County well records.

Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.