⟁ Minnesota Well Data field records · 2026 survey

Minnesota Well Data › St. Louis County › Brimson (55602)

Brimson, MN (55602): well depth, water level & drilling cost

✓ 190 CWI records · St. Louis County

76 ftmedian well depth
60 ft–102 fttypical depth range
14 ftmedian static water level
9 gpmmedian yield (180 tests)

How deep are wells in Brimson (55602), Minnesota?

The median drilled well depth in Brimson (55602) is 76 ft, based on 190 wells with recorded depths in the state CWI database. Half fall between 60 ft and 102 ft; 90% are shallower than 204 ft.

How much does it cost to drill a well in Brimson (55602)?

Applying published per-foot rates to the local median depth of 80 ft: drilling and casing alone typically runs $2,000–$5,200; a complete system including pump, pressure tank, and hookup typically runs $4,800–$8,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Brimson (55602)?

The median static water level is 14 ft below ground surface (middle half of wells: 8 ft–20 ft), from 100 measurements.

Pull every recorded well near a Brimson (55602) address — $19

Drilled depth distribution

0–50 ft 19 50–100 ft 119 100–150 ft 26 150–200 ft 5 200–300 ft 11 300–400 ft 7 400–600 ft 3 600+ ft 0
Looking at a specific property in Brimson (55602)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Part of St. Louis County well records.

Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.