⟁ Minnesota Well Data field records · 2026 survey

Minnesota Well Data › St. Louis County › Alborn (55702)

Alborn, MN (55702): well depth, water level & drilling cost

✓ 143 CWI records · St. Louis County

90 ftmedian well depth
72 ft–113 fttypical depth range
18 ftmedian static water level
15 gpmmedian yield (134 tests)

How deep are wells in Alborn (55702), Minnesota?

The median drilled well depth in Alborn (55702) is 90 ft, based on 143 wells with recorded depths in the state CWI database. Half fall between 72 ft and 113 ft; 90% are shallower than 148 ft.

How much does it cost to drill a well in Alborn (55702)?

Applying published per-foot rates to the local median depth of 95 ft: drilling and casing alone typically runs $2,375–$6,175; a complete system including pump, pressure tank, and hookup typically runs $5,700–$9,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Alborn (55702)?

The median static water level is 18 ft below ground surface (middle half of wells: 9 ft–30 ft), from 106 measurements.

Pull every recorded well near a Alborn (55702) address — $19

Drilled depth distribution

0–50 ft 3 50–100 ft 84 100–150 ft 42 150–200 ft 6 200–300 ft 8 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Alborn (55702)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Part of St. Louis County well records.

Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.