⟁ Minnesota Well Data field records · 2026 survey

Minnesota Well Data › Aitkin County › Jacobson (55752)

Jacobson, MN (55752): well depth, water level & drilling cost

✓ 139 CWI records · Aitkin County

72 ftmedian well depth
60 ft–119 fttypical depth range
14 ftmedian static water level
15 gpmmedian yield (137 tests)

How deep are wells in Jacobson (55752), Minnesota?

The median drilled well depth in Jacobson (55752) is 72 ft, based on 139 wells with recorded depths in the state CWI database. Half fall between 60 ft and 119 ft; 90% are shallower than 179 ft.

How much does it cost to drill a well in Jacobson (55752)?

Applying published per-foot rates to the local median depth of 76 ft: drilling and casing alone typically runs $1,900–$4,940; a complete system including pump, pressure tank, and hookup typically runs $4,560–$7,600. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Jacobson (55752)?

The median static water level is 14 ft below ground surface (middle half of wells: 8 ft–22 ft), from 94 measurements.

Pull every recorded well near a Jacobson (55752) address — $19

Drilled depth distribution

0–50 ft 6 50–100 ft 87 100–150 ft 24 150–200 ft 10 200–300 ft 5 300–400 ft 6 400–600 ft 1 600+ ft 0
Looking at a specific property in Jacobson (55752)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Part of Aitkin County well records.

Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.