⟁ Minnesota Well Data field records · 2026 survey

Minnesota Well Data › Freeborn County › Glenville (56036)

Glenville, MN (56036): well depth, water level & drilling cost

✓ 121 CWI records · Freeborn County

145 ftmedian well depth
125 ft–180 fttypical depth range
32 ftmedian static water level
40 gpmmedian yield (106 tests)

How deep are wells in Glenville (56036), Minnesota?

The median drilled well depth in Glenville (56036) is 145 ft, based on 121 wells with recorded depths in the state CWI database. Half fall between 125 ft and 180 ft; 90% are shallower than 218 ft.

How much does it cost to drill a well in Glenville (56036)?

Applying published per-foot rates to the local median depth of 140 ft: drilling and casing alone typically runs $3,500–$9,100; a complete system including pump, pressure tank, and hookup typically runs $8,400–$14,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Glenville (56036)?

The median static water level is 32 ft below ground surface (middle half of wells: 18 ft–48 ft), from 120 measurements.

Pull every recorded well near a Glenville (56036) address — $19

Drilled depth distribution

0–50 ft 0 50–100 ft 9 100–150 ft 54 150–200 ft 41 200–300 ft 11 300–400 ft 5 400–600 ft 1 600+ ft 0
Looking at a specific property in Glenville (56036)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Part of Freeborn County well records.

Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.