⟁ Minnesota Well Data field records · 2026 survey

Minnesota Well Data › Nobles County › Brewster (56119)

Brewster, MN (56119): well depth, water level & drilling cost

✓ 64 CWI records · Nobles County

148 ftmedian well depth
100 ft–226 fttypical depth range
43 ftmedian static water level
20 gpmmedian yield (49 tests)

How deep are wells in Brewster (56119), Minnesota?

The median drilled well depth in Brewster (56119) is 148 ft, based on 64 wells with recorded depths in the state CWI database. Half fall between 100 ft and 226 ft; 90% are shallower than 325 ft.

How much does it cost to drill a well in Brewster (56119)?

Applying published per-foot rates to the local median depth of 130 ft: drilling and casing alone typically runs $3,250–$8,450; a complete system including pump, pressure tank, and hookup typically runs $7,800–$13,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Brewster (56119)?

The median static water level is 43 ft below ground surface (middle half of wells: 30 ft–78 ft), from 56 measurements.

Pull every recorded well near a Brewster (56119) address — $19

Drilled depth distribution

0–50 ft 5 50–100 ft 10 100–150 ft 18 150–200 ft 11 200–300 ft 10 300–400 ft 7 400–600 ft 3 600+ ft 0
Looking at a specific property in Brewster (56119)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Part of Nobles County well records.

Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.