⟁ Minnesota Well Data field records · 2026 survey

Minnesota Well Data › Redwood County › Morgan (56266)

Morgan, MN (56266): well depth, water level & drilling cost

✓ 204 CWI records · Redwood County

138 ftmedian well depth
106 ft–165 fttypical depth range
45 ftmedian static water level
30 gpmmedian yield (184 tests)

How deep are wells in Morgan (56266), Minnesota?

The median drilled well depth in Morgan (56266) is 138 ft, based on 204 wells with recorded depths in the state CWI database. Half fall between 106 ft and 165 ft; 90% are shallower than 210 ft.

How much does it cost to drill a well in Morgan (56266)?

Applying published per-foot rates to the local median depth of 148 ft: drilling and casing alone typically runs $3,700–$9,620; a complete system including pump, pressure tank, and hookup typically runs $8,880–$14,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Morgan (56266)?

The median static water level is 45 ft below ground surface (middle half of wells: 33 ft–55 ft), from 183 measurements.

Pull every recorded well near a Morgan (56266) address — $19

Drilled depth distribution

0–50 ft 1 50–100 ft 38 100–150 ft 90 150–200 ft 46 200–300 ft 22 300–400 ft 1 400–600 ft 6 600+ ft 0
Looking at a specific property in Morgan (56266)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Part of Redwood County well records.

Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.