⟁ Minnesota Well Data field records · 2026 survey

Minnesota Well Data › Stearns County › Melrose (56352)

Melrose, MN (56352): well depth, water level & drilling cost

✓ 692 CWI records · Stearns County

75 ftmedian well depth
52 ft–110 fttypical depth range
21 ftmedian static water level
25 gpmmedian yield (663 tests)

How deep are wells in Melrose (56352), Minnesota?

The median drilled well depth in Melrose (56352) is 75 ft, based on 691 wells with recorded depths in the state CWI database. Half fall between 52 ft and 110 ft; 90% are shallower than 148 ft.

How much does it cost to drill a well in Melrose (56352)?

Applying published per-foot rates to the local median depth of 85 ft: drilling and casing alone typically runs $2,125–$5,525; a complete system including pump, pressure tank, and hookup typically runs $5,100–$8,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Melrose (56352)?

The median static water level is 21 ft below ground surface (middle half of wells: 11 ft–37 ft), from 337 measurements.

Pull every recorded well near a Melrose (56352) address — $19

Drilled depth distribution

0–50 ft 151 50–100 ft 323 100–150 ft 156 150–200 ft 36 200–300 ft 18 300–400 ft 7 400–600 ft 0 600+ ft 0
Looking at a specific property in Melrose (56352)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Part of Stearns County well records.

Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.