⟁ Minnesota Well Data field records · 2026 survey

Minnesota Well Data › Clay County › Barnesville (56514)

Barnesville, MN (56514): well depth, water level & drilling cost

✓ 389 CWI records · Clay County

100 ftmedian well depth
68 ft–136 fttypical depth range
12 ftmedian static water level
40 gpmmedian yield (364 tests)

How deep are wells in Barnesville (56514), Minnesota?

The median drilled well depth in Barnesville (56514) is 100 ft, based on 389 wells with recorded depths in the state CWI database. Half fall between 68 ft and 136 ft; 90% are shallower than 186 ft.

How much does it cost to drill a well in Barnesville (56514)?

Applying published per-foot rates to the local median depth of 93 ft: drilling and casing alone typically runs $2,325–$6,045; a complete system including pump, pressure tank, and hookup typically runs $5,580–$9,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Barnesville (56514)?

The median static water level is 12 ft below ground surface (middle half of wells: 7 ft–25 ft), from 211 measurements.

Pull every recorded well near a Barnesville (56514) address — $19

Drilled depth distribution

0–50 ft 24 50–100 ft 163 100–150 ft 125 150–200 ft 47 200–300 ft 30 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Barnesville (56514)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Part of Clay County well records.

Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.